How to Avoid Frozen Pipes

How to Avoid Frozen Pipes

Winter weather can make plumbing pipes to freeze. Possibly because of freezing, pipes could get burst and cause flooding in the home. To avoid frozen pipes, you need to take some steps like—

  • Set the thermostat to the same temperature for both day and night during cold seasons to prevent pipes from freezing.
  • Use pipe insulator to slow down the transfer rate of heat to cold.
  • In winter, always disconnect water hoses that are outside.
  • If the pipelines are in the garage, keep the garage doors close always.
  • Apply heat to the frozen section of the pipe with an electric hair dryer, portable space heater or wrap them with ahot towel.
  • Keep the faucet open to ensure ice melts because of running water.
  • Relocate your exposed pipes so that in future it will never get frozen during winter.
  • Let the water drip in a slow but constant flow from both the hot and cold water faucets in kitchen and bathroom; It relieves built-up water pressure in the pipes by moving water through the pipes if they should freeze.
  • To drain the water, turn off your sprinkler system and blow compressed air through the irrigation lines.
  • Close and weather band external basement windows and doors.
  • Before attempting to thaw out frozen pipes, locate the water main cut-off valve.
  • By following the manufacturer’s instruction, install a heat trace cable to keep a cold pipe from freezing.
  • Use a modern device which utilises an internal water contacting temperature.It will monitor the temperature of the water inside the pipes.
  • Use insulates foam board to protect vast areas
  • If the cabinets are located on exterior walls, make sure to open them to allow inside heat to pipes.
Top Ideas for Conserving Water at Home

Top Ideas for Conserving Water at Home

To manage fresh water as a sustainable resource or to protect a water body is known as water conserving. Saving water in the home cloud is a best practice for our environment. If we do not waste much water, we can save it for our future. Some ideas could be very fruitful to conserve water at home. They include—

  • Check leaks for all the pipes and faucets of the home. A small leak or drip of water from the pipe can waste lots of water per day. Always use a water meter to check the hidden water leaks.
  • Do not take along erthan you should in the shower. Turnoff the water pipe while you are soaping.
  • Rather than a hosepipe, water your garden with a watering can. Water the plants during early morning and late afternoon. It will reduce evaporation and also save water.
  • Always use the washing machine and dishwasher with full loads. This saves much water.
  • Install efficient faucets for your plumbing. Always check the leaks. Keep taps turned off while you are not using them.
  • Verify your toilets’ water level by checking them properly. Make sure that the flapper is not leaking and the fill valve is working properly.
  • Change the fixtures of your home which costs lots of water. Replace them with water-efficient fixtures.
  • Install a rain barrel for conserving water. Rainwater harvesting could be an excellent idea to hydrate your plants without using hose pipe which wastes lots of water.
  • Wash your car with less water. Keep a bucket of water with you without turning on your hosepipe.
  • When you are cleaning vegetables or other things, don’t let the faucet run. Rinse them in a pan of water.
  • Only water your lawn when it needs. Plant types of shrubs and plants that need less water.
DIY Plumbing Safety Tips

DIY Plumbing Safety Tips

Sometimes it’s quite difficult to get a plumber when you have to do some emergency work. So little bit knowledge about plumbing can make your task easier to do that work by yourself, which indicates a do-it-yourself (DIY). Whereas we are not professional plumbers, so we have to ensure safety before do it by own self. Some DIY plumbing safety tips are—

Wearing protective Stuff

Safety is a must before doing any DIY plumbing project. Electrical equipment and chemicals can cause harm to your skin, eyes and so on. So be sure to wear heat protective suit, mask, gloves, and safety goggles.

Buy a complete tool box

Try to buy a whole tool box before starting your work. Otherwise, a wrong tool can make you suffer, and you could get hurt during practice time.

Clean Workplace

Make sure that your working area is clean and organized. It will help you to complete your whole work early.


If you are working in an indoor place, ensure proper ventilation first. The congested area will cause suffocation causing difficulties during breathing.

Turn off electrical connections

When you are doing plumbing work, make sure that there is no electric source beside you. Turn off electricity because of your safety to avoid accidents from occurring.

Keep Emergency Numbers

Always keep emergency numbers like fire service, medical emergency, and police numbers,among others with you. It will be wiser if you keep someone besides you or inform someone while working.

Have Patience

Stay calm and do your job with lots of patience. No need to hurry since it will only make your work messed-up.

Do some research

Before starting a DIY plumbing project, do some research on that kind of work. Gather some knowledge about tools, technique, and safety tips from the internet or experts. This types of knowledge will help you to complete the task according to your plan.